|
Post by froggy54 on Apr 26, 2008 7:46:19 GMT
Hi everyone, Just bought a 8HD from Digital Village in the UK. Great synth for the price for sure ! I have a problem with my Roland Hold Pedal, it seems that the polarity on the fusion in inverted. When I press the pedal, the sound stops and when I release the pedal the sound is held. No way to change the polarity on my pedal. Do I need to buy a new one with a polarity switch or some hidden menu somewhere on the fusion ? Thanks in advance Fusioneers ! Franck
|
|
|
Post by gwenhwyfaer on Apr 26, 2008 12:41:08 GMT
I have a problem with my Roland Hold Pedal, it seems that the polarity on the fusion in inverted. When I press the pedal, the sound stops and when I release the pedal the sound is held. Do you plug the pedal into the Fusion whilst it's turned on? If so, try plugging it in whilst it's turned off, then turn it on - as far as I know, the Fusion can test for polarity, but only does so at boot time.
|
|
|
Post by Hollow Sun on Apr 26, 2008 17:01:41 GMT
as far as I know, the Fusion can test for polarity, but only does so at boot time. Correct. Steve
|
|
|
Post by Hollow Sun on Apr 26, 2008 17:02:11 GMT
Oh yes ... welcome to The Club froggy!
|
|
|
Post by froggy54 on Apr 26, 2008 17:19:10 GMT
Thanks for your quick answer, you were absolutely right ! just needed to boot and the polarity is detected !
|
|
|
Post by Shreddie on Apr 26, 2008 18:07:40 GMT
Bugger!! If I'd have known that I wouldn't have re-wired my pedal! Ah well
|
|