|
Post by Jesse on Sept 2, 2019 19:22:44 GMT
Alesis Fusion affectionately known as "The Beast"
First you will need to know which keybed you have, there were two different versions used in the 8HD.
I don't know if there was a difference in the keys themselves or just the action.
There is a link to instrumental parts at the top of the forum page they may be able to help you.
|
|
|
Post by billmelator on Sept 2, 2019 23:04:09 GMT
Thanks for the quick reply. The parts page only sells complete keybeds. How different are the 2 keybeds? I'd much rather buy a half dozen used ones and would just take a chance that I got the right ones or that they can be made to fit. Or I'll throw them away and get the other kind. There must be a dead 8hd out there somewhere. Glad to see you're still keeping this group alive. I'd like to help.
|
|
|
Post by Jesse on Sept 3, 2019 12:30:47 GMT
Thanks for the quick reply. The parts page only sells complete keybeds. How different are the 2 keybeds? I'd much rather buy a half dozen used ones and would just take a chance that I got the right ones or that they can be made to fit. Or I'll throw them away and get the other kind. There must be a dead 8hd out there somewhere. Glad to see you're still keeping this group alive. I'd like to help. Alesis Fusion affectionately known as "The Beast" I know, give them a call they may be able to tell you if both keybeds use the same keys, whether there are any differences between the notes and where you might be able to find some replacement keys Not all available parts are listed on their WEB page. Let us know what you find out
|
|
|
Post by Jesse on Sept 3, 2019 16:38:01 GMT
Alesis Fusion affectionately known as "The Beast" If anyone runs across a source for Replacement Keys for the Fusion list it here. Select open image in new tab, then click on new tab Alesis Fusion 8HD Looks like 6 basic shapes....pdf (281.44 KB) Thanks Chris "Alesis" "Fusion 6HD (61): Fatar TP / 9S, weighted" I guess 9S is the weight of the 6HD Synth Action "Fusion 8HD (88): Fatar TP / 40 " I guess 40 is the weight of the 8HD weighted Action My old parts list from Alesis Part Number 7-10-0022 for Keybed Assembly - Fusion 6HD Part Number 7-10-0110 for Keybed Assembly - Fusion 8HD - 1st Version Part Number AL7-10-0131 for Keybed Assembly - Fusion 8HD - 2nd Version I requested information from Instrumental Parts about replacement Keys, hopefully I will get some useful information from them.
|
|
|
Post by Jesse on Sept 4, 2019 4:18:47 GMT
Alesis Fusion affectionately known as "The Beast"
Instrumental Parts says they have the keys, but they want $17 per key, sounds a bit steep to me.
They also need to know which note you need.
|
|
|
Post by Jesse on Sept 4, 2019 19:09:05 GMT
Alesis Fusion affectionately known as "The Beast"
I have sent the following information to FATAR in hopes of receiving some useful information and possible parts source.
I am an amateur musician, I am the administrator for two forums that support the Alesis Fusion 8HD and 6HD, The FusionZone and The Fusion Club.
I am looking for information on the FATAR key beds used in these two workstations.
These digital workstations were produced between 2005 and 2008.
I am also looking for a source for replacement keys and other renewable parts for these FATAR keybeds.
There is one version used in the 66 key Fusion 6HD two versions used in the 88 key 8HD.
My Alesis Fusion 8HD Workstations Label on my first Fusion 8HD keybed FATAR CARTELLO CONTROLLO DATA ?/5/05 17178 Prepar. Base 209 Appl. Grasso e mole 209 Mont. Tasi Pal. 228 Mont. Tasti Diesis 361 Controllo Mecc. 080 Contr. Elettr. Sonoro 159
Sincerely, Jesse M. Smith
Invio effettuato con successo
|
|
|
Post by Jesse on Sept 16, 2019 15:15:19 GMT
Alesis Fusion affectionately known as "The Beast"
My first email attempt to reach FATAR was returned to me as undeliverable so I have tried one more time with this message;
I am looking for a source for replacement keys and other renewable parts for the FATAR keybeds used in the Alesis Fusion 6HD 61 key Workstation and the two versions used in the Alesis Fusion 8HD 88 key Workstation produced between 2005 and 2008.
|
|
|
Post by Jesse on Sept 17, 2019 2:56:41 GMT
Alesis Fusion affectionately known as "The Beast" Today I mailed a letter to FATAR in Italy, I can't believe it only cost $1.15 to mail it from Wilmington, NC USA to Italy. Now I play the waiting game and hope for the best.
|
|
|
Post by Jesse on Sept 26, 2019 14:47:00 GMT
Alesis Fusion affectionately known as "The Beast" FATAR received my letter the other day and emailed me. Unfortunately there is no support from FATAR. Your best option for parts other than buying new parts if available for the 6HD & 8HD is to look for a used non working or lightly damaged model for parts “Hi Jesse, How are you? We just got your letter today. Thanks for sending it over! I’m sorry to say that the keyboard assembled in the Alesis is no longer in production, and keys or hammers are no more available. I remain at your disposal. Thanks, best regards. Federica Celli Sales Department FATAR Srl Via Volponi, Zona Industriale Squartabue 62019 Recanati (MC) ITALY Tel. +39 071 75 06 078 ext. 206 Fax +39 071 75 06 142 federica.celli@fatar.com www.fatar.com”*********************************************************************************** “Thank you for letting me know. What about the rubber electrical contact pads under the keys are they available? One more thing, are the keys on the Alesis Fusion 6HD and 8HD interchangeable? Thanks ... Jesse” ******************************************************************************************************* “Hi Jesse, unfortunately the contact rubber is not anymore available. About the keyboard model assembled on Alesis Fusion 6HD and 8HD, we actually don’t know, as we not always know which Fatar keybed goes to which model. Moreover this was many many years ago. You could ask this to Alesis. Best regards.”
|
|