Post by picaja on Sept 15, 2007 11:17:46 GMT
If you are using seamless looper to create loops here is a tip: Sometimes you hear clicks after importing them on the fusion and you have to adjust the begin or end sample with ONE sample although they are perfectly looped in seamless looper.
You can eliminate this:
In Seamless Looper (pull down menu):
- Settings
- Offset
- Loop start (change this to -1)
No need to adjust the Loop end, value should be 0.
This does the trick, no more clicks.
You can eliminate this:
In Seamless Looper (pull down menu):
- Settings
- Offset
- Loop start (change this to -1)
No need to adjust the Loop end, value should be 0.
This does the trick, no more clicks.
