kara
New Member
Posts: 4
|
Post by kara on Dec 2, 2008 7:39:44 GMT
I'm brand new to the fusion, so forgive me if the question has been asked before....
I'm using the fusion live as a synth. The 'audio workstation' part doesn't realy interest me because I'm allready setup with other gear to record.
Now, in a live setup I would like to switch between different arp's during a song. I didn't find anything in the manual to do this? How should I do this ?
tia k
|
|
kara
New Member
Posts: 4
|
Post by kara on Dec 4, 2008 16:36:21 GMT
No answer... does that mean it isn't possible ?
k
|
|
|
Post by mickydireland on Dec 4, 2008 19:14:06 GMT
Hiya. I've no idea. I read the manual (yeah, for once!!!) lol, but no mention. Sorry. :-(
|
|
|
Post by wannabeme on Dec 14, 2008 19:51:38 GMT
hi Kara,
I have been learning how to use my fusion for a year now... Its no mean feat. I think I came across a way to do this some time back. I don't remember exactly how I think I did it in song mode like this
1: created an arpeggio arp 1 for a program on track 1 2:created an arpeggio arp 2 for same program on track 2 3: In song mode I select the Arp tab on left 4: Edit Arp 1 settings for "Change a/b on Fill:" <-select. 5: You can then set the T1,T2,T3,T4 buttons to either play fill or A/B change. You can also specify that the fill or change is carried by a footswitch (FS). Note the function switches can be changed as can the values. 6: Repeat steps 3, 4 + 5 for Arp 2 7: Finally Select the Track Tab and (in my example) edit tracks 1 and 2 to point the Link values to A and B, and the Arp Numbers to 1 and 2 respectively.
Play around with this you may get the results you are after. There may be a better way to achieve what you want. Would be nice if some-one would respond with a better solution.
good luck...
|
|
kara
New Member
Posts: 4
|
Post by kara on Dec 15, 2008 13:47:01 GMT
Thanks, I will try this
k
|
|