|
Post by Chief Big Smoke on Jul 12, 2010 19:10:16 GMT
Hello Will someone please tell me the Fatar keybed used for the 8HD? I own a 6HD, but would like to add a 88-key controller with a similar feel to the 8HD. I've seen one reference online that suggests Alesis used the TP/9, but I'd like to know for sure if this is the case. That said, does anyone know of another controller that uses the same keybed as the 8HD?
|
|
|
Post by Chief Big Smoke on Jul 13, 2010 16:40:51 GMT
To add to this... The 8HD keybed cannot be the TP/9 or the TP/8 boards as the entire keys (including what is inside the shell) are too long. I found a picture of an opened 8HD on another site that provides a good look at the keys (credit: electRiq 2007). When comparing this image to the pictures on Fatar's website of their keybeds, it appears that the 8HD used either the TP/10 keybed or the TP/40. Fatar's VMK series (as well as a few others) use the TP/40 keybed, but I'm unaware of any controllers that use the TP/10. In addition, there are multiple TP/40 subtypes ranging from "Graded Hammer" to "Light Touch." If the 8HD used a TP/40, I suspect it is the Medium or Light Touch. Alesis does not provide (or 'have') this information. If I hear back from Fatar, I'll post any new info. Attachments:
|
|
|
Post by Jesse on Jul 14, 2010 23:16:12 GMT
|
|
|
Post by Chief Big Smoke on Jul 15, 2010 2:58:02 GMT
Thanks for the post, Jesse. I ran across that thread around the time of my first post. Unfortunately, Alesis couldn't link the part numbers to a specific Fatar keybed. Again, thanks for the response. Hopefully, I'll eventually have some light shed on the matter. I'm still waiting on a response from Fatar...
|
|
|
Post by dysamoria on Jan 4, 2013 6:52:16 GMT
Any idea what the difference is between the two?
|
|
|
Post by Jesse on Jan 4, 2013 16:55:36 GMT
I don't know, but try asking Alesis, lets us know if you find any information on the two keybeds.
I will see what I can find out.
|
|
|
Post by Jesse on Nov 11, 2013 1:39:51 GMT
when I had one of my 8hd's open I found a label on the back side of the key bed, I don't know if it is version I or version II. Judging by the date (2005) on the label I would say version I Attachments:
|
|
wimsy
New Member
Posts: 2
|
Post by wimsy on Nov 11, 2013 12:56:34 GMT
Should be a Fatar TP40H or TP400. There was a discussion about this in a german forum.
|
|
|
Post by Jesse on Nov 11, 2013 16:26:25 GMT
Do you know what the difference is between the two keybed's?
|
|
wimsy
New Member
Posts: 2
|
Post by wimsy on Nov 12, 2013 16:06:53 GMT
As the german internet page says: The TP/400 with 88 Keys is the the same as the TP/40. But there are two different kind of TP/400. The difference is the polarity of the diods. Only the right polarity (donĀ“t know which) will work in the Fusion8.
|
|