|
Post by parametric on Dec 15, 2016 2:02:22 GMT
I've just acquired a 6HD to go with my 8HD. It's a later model with the 80Gb HD, but 1.23 OS ATM . . I need to install the 2 x E3 modules and do the SSD upgrade, then copy my 8HD volume to the 6HD - then the two will be identical, content-wise Annoyingly, one single key doesn't trigger a sound no matter how hard it is hit. I've not has cause to get involved with the keys to date, and annoyingly, this thread, from <azuro> fusioneer.proboards.com/thread/2557?page=1 seem to be missing its pictures that sound like they would have been helpful . . . Can we get these pics back Jesse? Your pic in the thread displays ok . . . ATB parametric
|
|
|
Post by Jesse on Dec 16, 2016 15:45:40 GMT
|
|
|
Post by parametric on Dec 19, 2016 15:53:42 GMT
Thanks Jesse, I'll take a look.
Do we have a DEFINITIVE Say-so on which Fatar keybeds reside in the 6HD AND the 8HD?
The other forum seems divided on the subject, with the 8HD having a TP/40 or a TP/9
The 6HD seems unknown . . . Perhaps I'll find out when I open mine? - but I don't know where to look - and even IF the keybeds themselves are marked with a type number in any case?
Fatar's own site is about as much use as a cat-flap in an elephant-house as regards information OR spares . . . . (Grrrrrr)
Any ideas anyone?
The Alesis SM's BOM for the 6HD usefully describes the keyboard part number as a "61-note keyboard" - BRILLIANT!
parametric
|
|
|
Post by Jesse on Dec 19, 2016 17:21:34 GMT
Alesis Fusion affectionately known as "The Beast" I don't know about the 6HD other than the Alesis Part number, I know there are two versions of keyboards for the 8HD, I took a picture of the label on mine which I figure is the earlier version as I preordered my 8HD before they went on sale.
|
|
|
Post by parametric on Dec 20, 2016 1:51:01 GMT
|
|
|
Post by parametric on Dec 23, 2016 4:04:42 GMT
|
|