|
|
Post by biffbeeper on Dec 8, 2007 22:00:07 GMT
Greetings from the G.W.N. (Great White North). Its cold outside but its getting hotter inside due to the anticipation of my 8HD just ordered from Sweetwater. A huge thank you goes out to the creator (s) of these sites and to all the participants that asked all the right questions and who thought outside of the box (or the manual) to come up with the workarounds and ideas that were not even thought of by the Fusion creators.
I only have one question that has not been explained in the forums(I think) "Can I sample the audio outs of the 8 ch audio hard drive recorder? Would access to another 8HD help to do this? And lastly, has anyone any ideas about what could be done with 2 Fusions. Hope this makes sense and my spelin is oka. Thanx in advance- Biff(the beeping)Beeper
|
|
|
|
Post by biffbeeper on Dec 9, 2007 23:09:03 GMT
No one?
|
|
|
|
Post by Shreddie on Dec 10, 2007 2:46:52 GMT
Hey! Don't worry! This board goes quiet from time to time. Welcome!
I'm sure that I've read that it is possible to resample the fusion by getting hold of 2 cables and plugging them from the outputs to the inputs. As for the exact method I'm unsure as I don't have a fusion yet! Try posting a new thread about doing that in the general section and see if you get more joy there.
Two Fusions?! Do you really need that much power?!
|
|
|
|
Post by Hollow Sun on Dec 10, 2007 3:00:22 GMT
Hi Biff,
Welcome to The Club.
Why do you want to do this? To master your stuff internally on Fusion? Forget it.
Take the analogue (or digital) outputs of your Fusion to a PC or a Mac and master your recordings there.
It may appear to be a weakness of Fusion to do this but believe me, there are better recording and mastering tools available for the PC/Mac than Alesis could ever offer.
Steve
|
|
|
|
Post by gwenhwyfaer on Dec 10, 2007 16:17:28 GMT
Hey! Don't worry! This board goes quiet from time to time. Welcome! I'm sure that I've read that it is possible to resample the fusion by getting hold of 2 cables and plugging them from the outputs to the inputs. You can record the output to the HDR that way. Resampling per se is unfortunately impossible; the Fusion stops doing anything else whilst it's sampling, and it will only accept input from the sample inputs - no sample importing facilities, unfortunately, except for the Fusion Convertor. (Yes, that is an annoyance.) |
|
feez
Junior Member
Posts: 194
|
Post by feez on Dec 15, 2007 10:39:16 GMT
Instead of record L and R on pC or external recorder, Export your 8 tracks to wave files and connect usb to pc, transfer the files and put your 8 tracks in a sequencer, and so you can make a better mix, and a real mastering !
Good zic !
Feez
|
|
|
|
Post by biffbeeper on Dec 15, 2007 21:36:03 GMT
Thanx Gwen: ("The Fusion stops doing anything else ...") says it all really doesn't it?
Thanx Steve and feez: I knew that stuff but it will probably help others that may be new to all of this. ouy
I'm so excited I can hardly chop down any trees or do any minnining like a proper Canadian.
Please help me all in a psychic mannor and repeat the secret mantra often and with great resolve. >>>>"I HOPE IT COMES SOON I HOPE IT COMES SOON I HOPE IT COMES SOON...
I'll let ya all know when ya all can to stop the secret mantraing
Thanks again
Bifferington
|
|
