|
|
Post by Jesse on Dec 20, 2010 18:10:37 GMT
|
|
|
|
Post by najvrtson on Apr 18, 2013 21:07:52 GMT
Hello, I have the 6HD three days now and have found one very strange thing: Many of the organ sounds have routed the Mod wheel to change the rotary speaker speed, but it does not work. If I route this functionality to other source (i.e. switch), it works fine. Some other functions work well on the mod. wheel (i.e. Drive in the Rotary Speaker effect)... Can anybody explain? Thanks a lot.
|
|
|
|
Post by Jesse on Apr 19, 2013 0:21:32 GMT
Whats' your audio setup, do you have stereo setup - left & right speakers or mono setup?
Which sound banks work and which ones don't?
|
|
|
|
Post by kpr on Apr 19, 2013 10:18:23 GMT
Hello, I have the 6HD three days now and have found one very strange thing: Many of the organ sounds have routed the Mod wheel to change the rotary speaker speed, but it does not work. If I route this functionality to other source (i.e. switch), it works fine. Some other functions work well on the mod. wheel (i.e. Drive in the Rotary Speaker effect)... Can anybody explain? Thanks a lot. Effects setting must be Rotary and Mod Destination assigned to the concerned Bus Effect and to High or Low Motor Rate with full amount. Consider that changing the Effect type can reset the Destination assignment and "suddenly" the Effect is gone  Check Preset Bank 1/020 Ballad Organ 1 as nicely working example and do the same assignments and settings for own Program Presets if you prefer the Mod Wheel as Rotary Speaker speed controller. |
|
|
|
Post by riffbeeper on Apr 19, 2013 15:58:13 GMT
That's it Klaus!
After too many hours n days of frustration, trying to get a foot switch to do it. That, is the answer!
Rifff
|
|
fdk
New Member
Posts: 2
|
Post by fdk on Jul 7, 2013 12:33:18 GMT
Hi there!
I'm using the Alesis Fusion 8HD several years without any problems. But today I've got a strange behavior. Suddenly I can't play any sounds in the program mode, there is no audio. In the mix and song mode I have no problems to play sounds. Has anybody an idea how to fix this?
Niko!
|
|
|
|
Post by parametric on Jul 10, 2013 1:20:33 GMT
Hi Niko - and welcome to the forum . . . . Perhaps try a factory reset . . . . Hold down <Rec> and <Play> while you power ON (This will also reset any GLOBAL settings you have altered, to their defaults - so you will need to reset them to your taste) Best Regards parametric |
|
fdk
New Member
Posts: 2
|
Post by fdk on Sept 24, 2013 11:25:39 GMT
Hi parametric!
Thank you for the response and sorry for my late answer. The Factory-Reset did not help. But I solved my problem... when a Expressionpedal is connected, everything is ok. But when not, sometime there is no sound. Strange behaviour.
Niko!
|
|
|
|
Post by Jesse on Sept 24, 2013 17:19:48 GMT
Hi parametric! Thank you for the response and sorry for my late answer. The Factory-Reset did not help. But I solved my problem... when a Expressionpedal is connected, everything is ok. But when not, sometime there is no sound. Strange behaviour. Niko! Niko, you use the expression pedal to control the volume, right - is full volume achieved when the pedal is in up or down position? I use an Alesis CF-1 pedal and full volume is achieved with the pedal in the down position. Sounds like it may be just a matter of the pedal position or there could be a problem with the Expression Pedal Jack. What pedal are you using for the volume control? Is global setting Mod+Volume?     |
|
Traboukos
Junior Member
The Strong Do What They Can And The Weak Suffer What They Must...
Posts: 51
|
Post by Traboukos on Oct 19, 2013 14:16:57 GMT
Hi, I have an issue with the piano sample sounds. All the programs that are using holy grail piano samples are not playing and when i try to load one of those sounds I receive an error message "cannot read file on rom" error code (0x0300000D).
I had the same problem before, send it for repair as long as it was still inside warranty period. They fixed it and send it back, but after a few weeks the same problem reappeared. Do you believe an Os reinstall can fix the problem? Is it safe to do it?
thanks
Aris
|
|
|
|
Post by Jesse on Oct 19, 2013 22:16:56 GMT
Hi, I have an issue with the piano sample sounds. All the programs that are using holy grail piano samples are not playing and when i try to load one of those sounds I receive an error message "cannot read file on rom" error code (0x0300000D). I had the same problem before, send it for repair as long as it was still inside warranty period. They fixed it and send it back, but after a few weeks the same problem reappeared. Do you believe an Os reinstall can fix the problem? Is it safe to do it? thanks Aris It is safe to reinstall the ver 1.24 OS and worth a try, as always before making changes to your Fusion back up your hard drive. What did they do when they repaired your Fusion last time, if you do not know I would inquire about what they did to fix it. |
|
Traboukos
Junior Member
The Strong Do What They Can And The Weak Suffer What They Must...
Posts: 51
|
Post by Traboukos on Nov 10, 2013 19:40:04 GMT
I asked them so many times but I was communicating with a sales man and not the technicians and he wasn't sure what did they do to repair it. I maybe give it a try again and ask him one more time. Could you please tell me what CF card do I need to buy to do the O.S. reinstall? Is there any tutorial how to reinstall O.S.? Thank you
|
|
|
|
Post by Jesse on Nov 10, 2013 20:17:02 GMT
|
|
|
|
Post by parametric on Nov 11, 2013 0:42:46 GMT
Hi parametric! Thank you for the response and sorry for my late answer. The Factory-Reset did not help. But I solved my problem... when a Expressionpedal is connected, everything is ok. But when not, sometime there is no sound. Strange behaviour. Niko! I forgot to mention . . . . Pedals MUST be connected to the Fusion BEFORE powering on. The Fusion looks for them at start-up. In my experience they DON'T WORK if plugged in as an afterthought - and may even cause unpredictable behavior . . . . Just a thought . . parametric |
|
Traboukos
Junior Member
The Strong Do What They Can And The Weak Suffer What They Must...
Posts: 51
|
Post by Traboukos on Nov 21, 2013 19:53:30 GMT
Cannot read file on ROM does not have a cause or a remedy in this list with the error codes  . I did contact the "musicstore.de" which I bought the instrument and they couldn't help me, they didn't know who was the technician who repaired it, or he wasn't there anymore... messed up situation. I will try to reinstall the OS. With the tutorial you posted seemed very easy. That process will delete my songs, programs, mixes, etc? thanks in advance for your help |
|
Check Preset Bank 1/020 Ballad Organ 1 as nicely working example and do the same assignments and settings for own Program Presets if you prefer the Mod Wheel as Rotary Speaker speed controller.
. I did contact the "musicstore.de" which I bought the instrument and they couldn't help me, they didn't know who was the technician who repaired it, or he wasn't there anymore... messed up situation. I will try to reinstall the OS. With the tutorial you posted seemed very easy. That process will delete my songs, programs, mixes, etc? thanks in advance for your help