|
Post by Jesse on Nov 21, 2013 20:59:33 GMT
Cannot read file on ROM does not have a cause or a remedy in this list with the error codes . I did contact the "musicstore.de" which I bought the instrument and they couldn't help me, they didn't know who was the technician who repaired it, or he wasn't there anymore... messed up situation. I will try to reinstall the OS. With the tutorial you posted seemed very easy. That process will delete my songs, programs, mixes, etc? thanks in advance for your help NO - installing the OS will not delete any songs, programs, mixes, etc.
|
|
Traboukos
Junior Member
The Strong Do What They Can And The Weak Suffer What They Must...
Posts: 51
|
Post by Traboukos on Mar 1, 2014 13:27:30 GMT
Hi, I tried OS v1.24 reinstall. - I formatted with the fusion the CF card, - extracted the fusion image 1.24 to the CF card (outside the volume folder), - boot up the fusion by pressing B & 7 and saw the message if I want to update/erase the ROM, - pressed OK and the process began. - After a few minutes I got this message "ROM image update failed, ROM image is corrupted, press hold (B)+(7) and power off then power on fusion again to retry the ROM image update." - So I turn off the fusion and tried again and I got the same message. Strangely after that the piano sounds were loading normally but there was an issue with the velocity sensitivity. I went to global menu to check if there was something wrong there but everything was normal. Piano sounds were like they lost the expression, I couldn't play "piano" and "forte" there was a middle situation like cheap old digital keyboards expression. So, - Downloaded again the fusion image 1.24, reformatted the CF card with fusion and did the whole process from the beginning. But I got the same message, that the ROM update failed... At least I think I found that the problem is with the OS... Anyone has any thoughts on that and how can I fix it?
Thank you very much, Aris
|
|
|
Post by Jesse on Mar 1, 2014 17:55:51 GMT
Where did you download the 1.24 image from? You did uncompress the 1.24 image and copy the bin file to the CF card correct? OS 1.24 file image download from Alesis link
|
|
Traboukos
Junior Member
The Strong Do What They Can And The Weak Suffer What They Must...
Posts: 51
|
Post by Traboukos on Mar 8, 2014 19:57:34 GMT
Yes, that was my download link. I extracted the image to the CF card outside the volume folder that the fusion created when I formatted the CF card by the fusion. After all that, even with the not complete OS upgrade process the fusion is working and the piano samples work too. After another try it's some kind better, I'm not sure if that is the default holy grail piano velocity because it's been I long time since I was able to use it... but at least is working. How can I reinstall the default program banks?
thank you, Aris
|
|
|
Post by Jesse on Mar 9, 2014 5:42:15 GMT
Fusion's factory sounds and programs are installed when you do the OS install with the exception of the Preset5 which has to be copied to the hard drive. Preset 5 can be downloaded from Alesis Fusion we site if you need it. Alesis Fusion Complete ProgramList1_2.pdf (147.26 KB) Fusion_Release_Notes Ver 1.24.pdf (257.71 KB) You might try the OS update with another CF card if you have one in case the one you are using has some bad data area's.
|
|
Traboukos
Junior Member
The Strong Do What They Can And The Weak Suffer What They Must...
Posts: 51
|
Post by Traboukos on Mar 9, 2014 22:27:01 GMT
I don't know... I bought it for this reason, brand new with capacity 2GB (http://www.amazon.com/Transcend-133x-CompactFlash-Memory-TS2GCF133/dp/B000VY2BC0). Unsealed it and format it with fusion :S But I'll give it a try if I find another one.
thank you
P.S. If you have used a CF card for OS update and worked, please tell me the brand and capacity to buy it.
|
|
|
Post by Jesse on Mar 10, 2014 5:29:15 GMT
I don't know... I bought it for this reason, brand new with capacity 2GB (http://www.amazon.com/Transcend-133x-CompactFlash-Memory-TS2GCF133/dp/B000VY2BC0). Unsealed it and format it with fusion :S But I'll give it a try if I find another one. thank you P.S. If you have used a CF card for OS update and worked, please tell me the brand and capacity to buy it. I have a SanDisk Ultra II 2 GB CF card that I have used for about 8 years and it still works. Maybe you know some one else who has a different CF card you could try. Good Luck ... Jesse
|
|